China square kiln shelf Manufacturers Factory Suppliers

Alumina Kiln Furniture is an appliance made of alumina that acts as a spacer, support, cushion, and protection for the blank during the firing process.

Product Highlights Our Corundum Mullite Saggers are made for burning very clean ceramic powders, like 5N alumina and indium oxide. They are very good at working well and lasting long. They are made

As a new type of high-tech ceramics, quartz ceramic products can effectively improve production efficiency, reduce the contamination to liquid glass and improve the purity of the finished products.

After many years of sintering experience, Zibo Gotrays has found out that when ceramics are first heated at 1450 °C to densify, and then heated to 1600 °C to react, ZsO4 is decomposed into Zo and

We produce various types of refractory materials, and ceramic plate as the load bearing board is one of our hot products that can be used in kilns. It features high temperature resistance, good

Composed of white alumina and mullite as starting materials and added in proper metal fines ,the products is processed by moulding under high pressure and sintering under high temperature.

This kind of kiln furniture is kind of Composite Material which utilize fully of the high strength, high abrasion of Corundum phase and high Creep resistance, high thermal shock resistance of Mullite

Corundum Plate made of high technical ceramics belongs to the category of furnace accessories.

A saggar is a type of kiln furniture. It is a ceramic boxlike container used in the firing of pottery to enclose or protect ware being fired inside a kiln.

Ceramic Sintered Plate is also called ceramic sintered thin layer plate, which is made by pressing raw metal powder into an ingot, then sintering and hot rolling.

We produce 95-99.7% porcelain crucible ,boats, insulating parts, rods, wear resistance parts, high temperature ceramic parts etc of alumina ceramic tube products.

Fused Alumina Plate is mainly formed by gelation and casting. Its thickness is uniform, up to 0.1mm, tolerance can be controlled within ±0.01mm, and its density is not less than 3.7g/cm3.