Cordierite Mullite Sagger For Sintering Ternary Battery Materials NCM811/NCM523/NCM622

Cordierite Mullite Sagger For Sintering Ternary Battery Materials NCM811/NCM523/NCM622

There are open saggers with gaps, closed saggers with footings and closed saggers of both corundum mullite and cordierite mullite. When we compare the three saggers, we find out that when piling up, the sagger with footings have the biggest gap, thus most efficient when stacking up together while the closed sagger can’t be used for this occasion.
Send Inquiry


Factories usually use cordierite mullite sagger with the alumina content of 40-60%.





Our company produce both primary and secondary kiln furniture and we have supplied both open saggers and saggers with footings of corundum mullite and cordierite mulllite for our customers.



cycling times can be up to 15 times-30 times.




When using for high nickel ternary battery materials, the cycling stablity will be negatively affected since the free lithium ion will react with alumina in the sagger, thus causing scaling of the product.




It is of great importance to make sure of fast and efficient air flow in the kiln to vent out exhaust and supply enough air or O2.




Chemical Analysis and Thermal and Physical Properties
Al2O3(%)45
SiO2(%)45
MgO(%)10
Fe2O3(%)<0.1
otherstrace
Bulk Density(g/cm³)≥1.9
Refractoriness(℃)1350
maximum working temperature (℃)<1300
thermal expansion (x10-6 /℃)2.04
Porosity(%)24~30

Please be noted: The data presented represents typical average results. They are subject to normal variation and should not be used for warranty or specification purposes. Also, since we have our own lab and factory, we are able to tailor products to meet customers' needs.




Contact us with the following information and then we will provide you with a good solution, quick response, all-round serice and quality product.



(1) the product you are using the sagger for;

(2) the type of kiln, the ordering of saggers, atmosphere and calcining temperature;

(3) the amont of saggers you are purchasing;

(4) your destination port




Hot Tags: cordierite mullite sagger for sintering ternary battery materials ncm811/ncm523/ncm622, China cordierite mullite sagger for sintering ternary battery materials ncm811/ncm523/ncm622 suppliers, manufacturers, factory, Cordierite Mullite Plate, Fused Alumina Sagger, Kiln Furniture Kit, Ceramic Crucible, Corundum Mullite Crucibles, Quartz Sleeves

Send Inquiry